P26 DPF Cleaner Aerosol 400mL - Penrite

P26 DPF Cleaner Aerosol 400mL - Penrite is an easy-to-use, professional strength, workshop-grade Diesel Particulate Filter (DPF) cleaner that effectively cleans and loosens carbon and ash deposits in a DPF. Its foaming formulation deeply penetrates into the pores of the honeycomb structure of a DPF.

APPLICATION

P26 DPF Cleaner Aerosol is designed for use in all diesel engine vehicles fitted with a DPF in passenger cars, 4WDs, and light and heavy-duty commercial vehicles.

P26 DPF Cleaner Aerosol is used to easily regenerate clogged or heavily soot-contaminated DPFs and can be used as a solution or preventative measure. It should be used at the first sign of a blocked or heavily soot-loaded DPF. This is usually identified by a warning light on the dashboard of the vehicle.

INSTRUCTIONS FOR USE

• Let the engine and DPF cool down until it is safe to touch before using P26 DPF Cleaner Aerosol, the ideal temperature is between 10^oC – 40^oC
• Remove either the front pressure sensor hose from the particulate filter or the temperature sensor.
• Shake the can of P26 DPF Cleaner Aerosol thoroughly and connect the flexible tube to the aerosol can.
• Insert the tube of the aerosol in through the Pressure Sensor or the Temperature Sensor opening with the spraying direction towards the filter.
• Spray the product into the DPF in bursts (3 to 5 times), with intervals of 5 minutes between bursts until the entire contents are used.
• Let the product soak for a minimum of 30 minutes
• Reconnect the Pressure Sensor hose or the Temperature sensor.
• Place an oil pan or suitable container under the outlet of the exhaust system.
• Start the engine, and dirty water (contaminated with soot and ash) will drip out of the exhaust pipe. Let the engine idle until the dripping stops.
• Perform a manual regeneration cycle with a diagnostic tool or drive the vehicle for 20-30 minutes at higher engine speeds than normal as this will heat up the DPF and assist in regeneration.
• If necessary, clear error messages with a Diagnostic or Scan Tool.
• To maximize the cleaning of the DPF, Penrite suggests adding a bottle of Penrite Enviro+ DPF Cleaner to the fuel following the aerosol cleaning as this will lower the burning temperature of the soot and assist in a more complete regeneration of the DPF.

Please Note: If the DPF light continues to stay light after the treatment and regeneration, we suggest taking the vehicle to an authorized workshop or service center for professional assistance.

• Cleans DPFs without the need for total dismantling
• Extends the life of DPFs
• Restores engine performance and the capacity of the DPF
• Metal-free and does not leave any residue after evaporation
• Resolves DPF clogging and the associated symptoms like increased fuel consumption and power loss