Golden Yellow Y14 Rust Not Anti-Corrosive Epoxy Paint 4L - HiChem

This Golden Yellow Y14 Rust Not Anti-Corrosive Epoxy Paint by HiChem offers superior corrosion resistance and an aesthetically pleasing golden yellow hue. The long-lasting epoxy paint is formulated for a strong bond, providing a durable finish and protection.

A single pack epoxy enamel for the decoration and protection of new and old metal surfaces. For interior and exterior application. Used for decorating items such as wrought iron, metal structures, railings, garden fun gutters, downpipes, fences, gates and tools. Suitable on a variety of metal surfaces such as mild steel, galvanised and zinc coated steel, aluminium, after application of suitable primer. Also suitable on surfaces such as timber and concrete after application of a suitable primer or undercoat. Provides a durable corrosion and abrasion resistant high gloss finish. Easily applied by brush, roller or spray.
DIRECTIONS: Stir thoroughly before use.
Surface Preparation: Remove all mill scale, rust and old flaking paintwork by wire brush, grinding and/or sanding is desirable to sand the whole surface. Remove all the gloss from previously painted areas by sanding with 280-400 grit abrasive paper. Clean surface with Mineral Turps to remove all traces of wax, grease, silicone, No primer is required for (a) steel under mild service conditions or for interior use or (b) when the steel is Primer, HiChem Cold Gal or HiChem Super Etch Primer. For heavier rust or if rust cannot be removed treat with r only lightly rusted. However, for superior protection of steel surfaces prime with HiChem Metal
Converter & Primer Sealer then prime with Metal Primer.
Femus Surfaces: For adhesion to zinc coated or galvanised steel use Super Etch Primeror Galvanised fron or other metals such as aluminium, copper and brass prime with Super Etch Primer.
Prime with Oil Based Primer for Wood.
Brushing-thin with up to 5% by volume Mineral Turps if required.
with up to 15% Enamel Thinner E250 or Mineral Turps.
at lower temperatures. Sand lightly then apply a second coat. Avoid application in damp 2 coats by brush, roller or spray. Apply first coat then allow to dry for minimum of 16 hours at
emperature is less than 10°C.
15 square meters per litre.
A20°C, touch dry 2 hours, hard dry 24 hours. Recoat after 16 hours.
Enamel Thinner E250 or Mineral Turps.
cool dry place. Always replace the lid securely after use.
refer to the Product Information Sheet.
Harmful by inhalation and if swallowed. Irritating to skin.
and gloves. Keep away from sources of ignition-no smoking. Do not empty into drains. Avoid contact with the skin and eyes and avoid breathing the vapour. Wear protective clothing dvice contact a Poisons Information Centre (Phone 13 11 26) or a doctor. If swallowed do NOT
on earth, sand or absorbent material. foam, or carbon dioxide to fight fire.
refer to the Material Safety Data Sheet.
73 Hallam South Rd., Hallam, Vic. 3803. Australia Ph (03) 9796 3400
Manufactured by HiChem Industries Pty. Ltd.